New milling grade for predictable tool life in titanium machining

Publicado el 21/10/2026

Sandvik Coromant combines EthaCore™ carbide technology and Zertivo® technology in the GC1250 grade to improve process security and reduce the carbon footprint of its tools.

Sandvik Coromant, a leading manufacturer of cutting tools and manufacturing solutions, has developed the GC1250 grade for indexable insert milling. This new grade is specifically designed for machining titanium alloys. This grade combines EthaCore™ carbide technology with a nano-multilayer PVD (physical vapor deposition) coating to optimize impact toughness, durability, process reliability, and reduce environmental impact.

Titanium's poor thermal conductivity causes intense heat concentrations to build up at the cutting edge, accelerating the risk of wear, chipping, and unexpected insert failure. The GC1250 grade solves these problems with a completely new structure that combines Sandvik Coromant's patented EthaCore™ carbide platform with Zertivo® nano-multilayer PVD coating technology.

The customer value proposition focuses on three key elements: innovation, performance, and sustainability. The resilient substrate has been designed to adapt to changing thermomechanical loads, helping to increase tool life predictability, reduce unexpected failures, and prevent potential production downtime.

" The GC1250 grade sets a new standard in titanium milling with its incredible performance in terms of impact toughness and predictability ," says Wayne Mason, Global Product Application Manager for Grades at Sandvik Coromant. " By reducing the number of insert breakages and unexpected stoppages, this grade is a solution that helps customers optimize machine utilization and the cost-effectiveness of their machining processes ."

The GC1250 grade also contributes to achieving sustainability goals. EthaCore™ achieves a substantially lower carbon footprint than leading competitor grades, which instead use ruthenium-based carbide in this application.

" Advances in performance and sustainability increasingly need to go hand in hand, " adds Mason. " The GC1250 is a solution that enables safe and profitable machining of titanium while reducing the carbon footprint associated with the tools needed to machine it ."

Grade GC1250 is optimized for roughing to semi-finishing operations in titanium alloys. It is designed for wet machining and is available for a wide range of CoroMill® concepts for shoulder milling, face milling, slot milling, high-feed milling, and profiling.

The introduction of the GC1250 grade also completes the 1200 series, creating a comprehensive offering covering all major processing material groups. Customers now have access to the most advanced coating and substrate technologies for a wide range of applications.

Sandvik Coromant

Together with our customers and partners, Sandvik Coromant provides tooling solutions to metalworking industries worldwide. Over eighty years of practical experience have allowed us to build a wealth of knowledge in metal cutting and machining. This expertise transforms every challenge into an opportunity for innovation, collaboration, and cutting-edge solutions. Our goal is to drive positive change by fostering efficiency and growth to shape a future where innovation is at the forefront. Part of the global industrial engineering group Sandvik, Sandvik Coromant is committed to building the future, together with its customers.

Para más información: Sandvik Coromant

Otros artículos que te pueden interesar

Linde mh italia acquires the dealership ceas carrelli srl and strengthens its presence in central it

The acquisition of the dealership CEAS Carrelli strengthens Linde MH’s direct presence in Central Italy. The company’s operations are being incorporated into the Central Adriatic Branch, which will now encompass locations in both Miglianico and Bastia Umbra, thereby expanding its territorial coverage.Linde MH Italia, the Italian subsidiary of Linde Material Handling—a global leader in intralogistics solutions—announces the acquisition of CEAS Carrelli Srl. Active in the material handling sector across Umbria and surrounding areas, CEAS Carrelli’s primary operational base is located in Bastia Umbra, in the province of Perugia.The transaction, formalized via a notarial deed on September 30 and effective as of October 1, 2026, entails the integration of CEAS Carrelli’s operations into Linde Material Handling Italia S.p.A. and their incorporation into the Central Adriatic Branch.Building on the experience and established presence of its Miglianico (Chieti) office, the Central Adriatic Branch is expanding its territorial reach by integrating the operations of CEAS and the regions it serves.Led by Branch Director Nicola Tamburri, the Central Adriatic Branch will operate primarily through its locations in Miglianico and Bastia Umbra. Its service area will cover Molise, Abruzzo, the Marche region (excluding the province of Pesaro and Urbino), the Umbrian provinces of Perugia and Terni, and the province of Arezzo.With this new organizational structure, Linde MH reinforces its direct presence across a broad area of Central Italy, building upon the work already established by the Miglianico office and extending its operational scope. This acquisition is part of the ongoing development of Linde MH Italia’s direct network, aimed at further strengthening customer proximity and ensuring an increasingly well-structured commercial and technical presence across the region.“The acquisition of CEAS Carrelli marks another step in Linde MH’s growth journey and allows us to significantly strengthen our presence in Central Italy” comments Luca Esposto, Vice President of Sales & Service for Linde MH in Italy. “Integrating CEAS Carrelli’s operations into our Central Adriatic branch enables us to achieve even greater territorial coverage, while delivering expertise, support, and services that meet Linde’s high standards.”About LINDE MHLinde Material Handling develops high-performance material handling solutions, customized to meet the specific needs of individual customers.In addition to being one of the world’s leading manufacturers of forklift trucks and both manual and automated warehouse equipment, Linde MH offers a comprehensive range of fleet management solutions, driver-assistance systems, mobile robots, a wide variety of software solutions, and professional consulting and technical support services.The Linde MH brand stands for peak performance—achieved through technological innovation, superior standards in operator ergonomics and safety, and a diverse array of energy options.In Italy, Linde MH operates through a network comprising 10 branches, 23 dealerships and partners, and over 800 specialized service technicians, ensuring a prompt and effective response to customer needs.

19/10/2026 Leer más

Duratomic® technology raises the bar in steel turning

Seco® introduces TP3502, a new CVD-coated Duratomic® turning insert that represents a breakthrough in insert design for ISO P steel applications. Thanks to continuous improvements in manufacturing methods, TP3502 establishes itself as the new benchmark in performance. The result is exceptionally stable and predictable tool life, even under interrupted cutting and varied machining conditions. A new benchmark for steel turning TP3502 was developed for steel machining applications involving varying material hardness, complex component shapes, and interrupted cuts. Positioned as a versatile ISO P insert, it balances wear resistance and toughness in a wide range of applications. Rated in the ISO P35 range, TP3502 is designed to compete with CVD inserts in steel turning. The insert features an updated coating and cutting edge preparation designed to produce a more controlled wear progression and longer insert life than previous generations. The goal is to enable higher cutting speeds while maintaining process stability and consistent part quality. Designed for interrupted or variable cutting conditions TP3502 is an insert for turning steels, from low-alloy steels and stainless steels to ductile irons and powder metallurgy materials. These applications often involve interruptions and variable cutting conditions, requiring both toughness and reliable performance. "With TP3502, the focus is on improving process reliability in steel turning," says Mikael Lindholm, Global Product Manager General ISO Turning at Seco. " This stability allows manufacturers to increase cutting data and simplify production planning ." The insert also incorporates features to support digitalization and sustainability initiatives. Chrome edge detection is designed to help operators maximize the use of each cutting edge, while a Data Matrix code enables digital traceability and monitoring. The TP3502 is manufactured using recycled powder and is included in the recycle-buy-back program, supporting waste reduction and sustainability reporting.

14/10/2026 Leer más

Gefran's advanced automation redefines bausano's ai-driven extrusion

In the plastics processing sector, the growing adoption of digital and intelligent solutions is redefining the ways in which extrusion processes are controlled and optimized. In this context, the collaboration between Gefran and Bausano is consolidated: a synergy that integrates advanced automation and industrial AI , with Gefran enabling the intelligent line architecture, while Bausano integrates it vertically into the extrusion process. The result is a new generation of Bausano systems, further enhanced by Gefran technology, which guarantees greater operational simplicity and an even more intuitive user experience. AI-DRIVEN EXTRUSION: WHEN DATA BECOMES OPERATIONAL VALUE The ability to collect, analyze, and interpret data in real time, through distributed intelligence throughout the entire process, transforms plant-generated data into immediately actionable insights that can concretely support operators in their daily decisions. The result is more stable, efficient, and responsive production, where data becomes an active element for enhancing performance: AI transforms process KPIs into concrete and timely actions , helping prevent anomalies to ensure a continuous and efficient production flow. G-MATION P6: AT THE HEART OF DISTRIBUTED INTELLIGENCE To meet these challenges, Gefran introduces G-Mation, an open, modular, and scalable automation platform that integrates process control, Industrial IoT, and generative artificial intelligence. A key element is the G-Mation P6 PLC , an in-panel device that combines the functionality of a process controller with that of an edge device. The PLC guarantees cycle times of up to 250 µs, supports multiple EtherCAT network topologies , and integrates a web server that offers multiple visualization options. It also implements the MQTT, OPC UA, and Euromap communication standards and supports VPN agent installation to ensure secure network connections without the need for external gateways. Furthermore, the Docker architecture allows new applications to be added in the form of apps, without impacting machine control performance. The G-Mation P6 PLC architecture was designed to comply with the requirements of new cybersecurity regulations , integrating control, visualization management, apps, and cloud connectivity within the same device. This way, the number of interfaces exposed to cyber attacks is reduced and the effort required for machine certification is significantly reduced. SKILLS AND DATA: THE OPERATIONAL BENEFITS OF AI IN EXTRUSION It is precisely on this innovative Gefran architecture that Bausano has built a new paradigm for AI-driven plastics extrusion. In a market where specialized operators are increasingly difficult to find, the challenge, beyond automation, lies in transferring skills and decision-making capabilities directly into process control . The integration of machine learning algorithms within the line allows for real-time analysis of operational data, preventing anomalies, and dynamically optimizing process parameters. Every second, an extrusion line generates thousands of data points that AI converts into measurable values, facilitating operator onboarding , structurally reducing machine downtime, and ensuring greater stability, safety, and overall line performance. SPHERA: THE AI ECOSYSTEM THAT TURNED DATA INTO ACTION This is the context in which SPHERA takes shape, an AI ecosystem directly integrated into the extrusion line designed to operate within a single, coordinated suite. At the heart of the platform is PHAROS, an analytics engine that enables real-time monitoring of dynamic KPIs and OEE , predictive diagnostics, and historical data analysis to prevent anomalies and keep the extruder in optimal operating conditions. Operating alongside PHAROS is RANGER , the result of a combination of Generative and Agentic AI models . It is now able to autonomously read the data generated by PHAROS and intervene in advance to prevent deviations and optimize performance. Trained and customized specifically for the customer's specific needs , it directly supports the operator in making critical adjustments, with contextual and data-driven suggestions. "The introduction of artificial intelligence into companies is now an increasingly strategic competitive factor. According to Eurostat, by 2025, nearly 20% of European companies with at least 10 employees will use AI-based technologies, a figure that exceeds 55% among large companies," comments Renzo Privitera, Sales Director at Gefran, who concludes , "True progress in extrusion comes from the integration of mechanics, data, and digital intelligence. It is precisely companies' ability to manage complexity and simplify it that will determine their competitiveness in the market." Massimiliano Fenili, Technical Manager at Bausano, states: “When technological infrastructure and process expertise converge, extrusion evolves into a truly intelligent system capable of dynamically adapting to production variables,” concluding, “Once again, this is the value of the collaboration between Bausano and Gefran: jointly developing a cutting-edge solution, specifically for extrusion, already operational in the field with concrete and measurable results.”

14/10/2026 Leer más

New milling grade for predictable tool life in titanium machining

Otros artículos que te pueden interesar

Linde mh italia acquires the dealership ceas carrelli srl and strengthens its presence in central it

Duratomic® technology raises the bar in steel turning

Gefran's advanced automation redefines bausano's ai-driven extrusion

Dati Legali

Sede Legale

Registro Imprese

Contatti